TECHNICAL INFORMATION

4. GLOSSES

4.2 GLOSSES IN WATERY BASE

4.2.5 CRUST GLOSS

CHARACTERISTICS: Mixture of acrylic polymers, waxes and leveling and touch additives properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.

APPLICATION FIELD: Full-grain finished in tannery or crust (without finishing), when you want to enhance the leather quality.

INSTRUCTIONS FOR USE: After thoroughly cleaning leather from glues and other filth, and after repairing and leveling colours if necessary, you will apply Crust Gloss with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us that the correct distance is from 25 to 35 cm. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.

It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.

SECURITY: Look up the general security section.

REMARKS: It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.