Resins

Pellfix RE-04

Features:
PELLFIX RE-04 is an aqueous dispersion of a copolymer of acrylic esters and styrene, free of ethoxylated alkylphenols. PELLFIX RE-04 is used in the textile and leather industry as a binder for non-woven fabrics and surface coatings, giving them hygroscopic properties.

Properties:
- Total solids: 50% +/- 1%
-Vitchardfield Brookfield RVT at 23ªC (sp 3/20 rpm, mPa · s): 1,500-2,500)
-PH: 8.0 +/- 0.5
-Appearance of the film: Transparent-Rigid.
-System: Anionic

Application Field:
PELLFIX RE-04 is a water-based resin with a fine particle and large anchorage, suitable for impregnation of webs, to which it provides medium hardness and water-repellent properties. The amount to be applied of PELLFIX RE-04 depends on each particular application, whether it is for surface coatings or for impregnations of fabrics and non-wovens. For a correct use of the product on a textile support, our recommendation is firstly to apply a drying process for the total elimination of the water and then proceed to the crosslinking process for 3 min. at 140-150 ºC.

How to use:
Normally it is used in the prefabricated floors, after refining the edge or heel (the finer the grain of the sandpaper to refine the best appearance will have the finish), several soles are grouped in a column that is held with a hydraulic in the air extraction cabinet, is applied to spray gun with a 1-1.5 mm product nozzle at a pressure of 2-4 atmospheres and a reasonable distance, practice tells us that 20 or 30 cm. it's correct. An advantage of this ink is that it allows brushing with fabric brush impregnated with our ABRASIVE 3G WAX at 800/1000 r.p.m getting a finish very similar to that of a sanded edge. You can also apply with a brush when the floor is attached to the shoe. Most of the time, both for spray and brush applications, it is necessary to dilute 3 parts of INK TS-10 with 2 parts of SOLVENT TS approximately, adjusting in each case. It is important to have an application booth equipped with a good extractor, water curtain and a good light to see that the application is correct. It is advisable to use a protective mask.

Security:
Consult the safety sheets.

Observations:
Barrachinas can not control the conditions of use of its products, for this reason it can not accept responsibilities regarding the results and / or consequences that may derive from its use.

Pellfix RE-019

Features:
PELLFIX RE-019 is a polyacrylate binder in an aqueous dispersion with an off-white milky liquid appearance.

Properties:
-SOLIDOS: 40% +/- 1.5%.
 -PH: 3.5 +/- 0.5
The film of PELLFIX RE-019 is colorless, transparent and solid to the light, being this soft and elastic.

Application Field:
The PELLFIX RE-019 is especially indicated for the impregnation of frosted leathers. Due to its high filling power, it is also suitable for closing the surface of very absorbent leathers. Due to its characteristics, it corrects the looseness of the flower without hardening the skin.

Security:
Consult the safety sheets.

Observations:
Barrachinas can not control the conditions of use of its products, for this reason it can not accept responsibilities regarding the results and / or consequences that may derive from its use.

Pellfix RE-025

Features:
PELLFIX RE-025 is a high-gloss polyurethane dispersion in a semi-transparent liquid-like aqueous medium.

Properties:
-SOLIDOS: 40% +/- 1.5%.
-PH: 7.5 +/- 1.
The film of PELLFIX RE-025 is of great resistance to traction and elongation. It gives leather a high transparent shine with high resistance to light.

Application Field:
The PELLFIX RE-025 due to its high gloss is ideal for charolina finishes. Your film is very resistant to solvents.

Security:
Consult the safety sheets.

Observations:
Barrachinas can not control the conditions of use of its products, for this reason it can not accept responsibilities regarding the results and / or consequences that may derive from its use.

Pellfix RE-022

Features:
Combination of acrylic polymers in aqueous emulsion. Its appearance is of a milky white liquid.
Application Field:
Anionic resin for solutions with a wide range of PH (PH = 5-12). It is recommended to apply the product in an acid medium. Apply on the leather prior to the gluing of the sheet, thus achieving effects of aging, craquelé, etc. when attaching.

How to use:
Application by spray gun.

Security:
Consult the safety sheets.

Observations:
Barrachinas can not control the conditions of use of its products, for this reason it can not accept responsibilities regarding the results and / or consequences that may derive from its use.