Soles, Edges and Heels Finishing
This group includes every finishing product for parts of the shoe different from vamp. That is, they are products only for edges, heels and soles made of leather but also of synthetic materials like PVC, vulcanized rubber, etc…
Although we have solutions for every material used in shoe manufacturing, only leather edges, heels and soles will be discussed.
In this section it is also developped the possibilities of our synthetic inks TS-10, and our Leather Goods Edges Inks.
CHARACTERISTICS:
Mixture of natural and synthetic waxes properly formuled to get a high filling and brightening power when being applied and polished on a lining heel or a leather edge.
APPLICATION FIELD:
Leather edges and heels.
INSTRUCTIONS FOR USE:
On a leather edge or heel previously sanded with a roughing sandpaper, you will apply our filler MORDIENTE. After a normal drying up you will sand it again with a number 300 to 400 sandpaper. Afterwards you will apply the ink with a paintbrush. Once the ink is dried up you will polish leather with a leather sheets roller at 800 r.p.m. approx. to melt waxes and fill up leather. You will eventually brighten it with a cotton or wool brush impregnated with our BRIHGTENING WAX.It is convenient and advisable to apply NATURAL OR COLOURED TCC in good conditions of ventilation and hand protection to avoid skin contact and any allergic reaction or irritation.
SECURITY:
Look up the security pages.
REMARKS:
Natural TCC Ink is used for natural edges and heels. For any special colour you must ask our zone technicians.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date:28/03/24
CHARACTERISTICS:
Mixture of natural and synthetic waxes properly formuled and coloured to get a high filling and brightening power when being applied and polished on a lining heel or a leather edge.It has a bigger particle. Therefore you will use it when applied on linings with a greater filling necessity to cover their defects.
APPLICATION FIELD:
Leather edges and heels.
INSTRUCTIONS FOR USE:
On a leather edge or heel previously sanded with a roughing sandpaper, you will apply our filler MORDIENTE. After a normal drying up you will sand it again with a number 300 to 400 sandpaper. Afterwards you will apply the ink with a paintbrush. Once the ink is dried up you will polish leather with a leather sheets roller at 800 r.p.m. approx. to melt waxes and fill up leather. You will eventually brighten it with a cotton or wool brush impregnated with our BLACK BRIGHTENING WAX.It is convenient and advisable to apply Q-2 TCC INK in good conditions of ventilation and hand protection to avoid skin contact and any allergic reaction or irritation.
SECURITY:
Look up the security pages.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of waxes and polymers properly formuled to get a good gloss when applied and polished on a leather sole.
APPLICATION FIELD:
For Buffed or not Buffed leather soles.
INSTRUCTIONS FOR USE:
You will apply it with a paintbrush or a spraying gun on a leather sole that may have been previously buffed. Once it is dried up you will polish it with a fabric sheets brush at 100 r.p.m. approx. impregnated with our ABRASIVE WAX to remove and level every leather surface imperfection. You will then brighten leather with a horsehair and cotton or wool brush at 500 r.p.m. approx. impregnated with our BRIGHTENING WAX.It is important to have a good application cabin equipped with an extractor fan, water screen and light for the application to be rightly done. It is convenient to use protecting mask.
SECURITY:
Look up the security pages.
REMARKS:
Our zone laboratories can give TPC INKS any desired colour.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of acrylic copolymers properly formuled in an organic dissolution to get a high gloss when applied on edges or heels made of synthetic materials. When it is properly coloured you can get a finish with a desired colour.
APPLICATION FIELD:
Generally speaking, for every edge or heel made of synthetic material, rubber, TR, etc…, when you want to get a bright and filled edge.
INSTRUCTIONS FOR USE:
It is usually used in the sole premanufacturing. After sanding the edges and heels (the smaller the sandpaper grain the better the finish aspect), several soles are grouped in a column that is holded with an hydraulic fixer in the air extraction cabin. The product is then applied with a nozzle opening of 1 to 1,5 mm., with a 2 to 4 atm. pressure and a proper distance, 20 to 30 cm. according to our experience. An advantage of this ink is that can be brushed with a fabric brush impegnated with our ABRASIVE WAX 3G at 800 to 1000 r.p.m. getting a finish similar to a polished edge. It can also be applied with a paintbrush when sole is already attached to the shoe. Most of times it is necessary to dilute 3 parts of TS-10 INK with 2 parts of TS SOLVENT approx., depending on the particular case, the same when applied with gun or paintbrush.It is important to have a good application cabin equipped with an extractor fan, water screen and light for the application to be rightly done. It is convenient to use protecting mask.
SECURITY:
Look up the security pages.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of solvents and oils, coloured with anilines to the disired tone.
APPLICATION FIELD:
It is to dye CRUST (without finishing) when Shoemaker wants to dye the leather his client needs.
INSTRUCTIONS FOR USE:
When CRUST is cut in pieces, it immerses in a container with Colour IMS Ink. After some seconds of immertion take leather out and leave to dry in a place with good ventilation..
It is important to use gloves, and to have a good ventilation in the place of working. It is a product in solvent base, we must be very strict in his used.
SECURITY:
Look up the general security section.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of naturals shellacs in a solvent medium. Its aspect is of a dark yellow liquid, and with the characteristic solvent smell.
APPLICATION FIELD:
For getting high quality finishings in EDGES and HEELS.
INSTRUCTIONS FOR USE:
EDGES and HEELS are sanded with a thick sandpaper (80-140). Afterwards you will apply MORDIENTE with a paintbrush. Once MORDIENTE H is dried up (5-10 minutes), you will sand with a thin sandpaper (240-320). MORDIENTE H makes hard fibre leather to get easier a good sanded, and therefore a nice and glazed surface.
SECURITY:
Look up the security pages.
REMARKS:
Ours zone laboratoires will supply you with any coloured Mordiente H.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of proteins, properly coloured and formuled to dye on the Leather edges. It is easy to clean the surface leather during the aplication.
APPLICATION FIELD:
For leather edges.
INSTRUCTIONS FOR USE:
When leather is cut and piled up in pieces, it will apply Colour Leather Edges Ink with a spraying gun. It leaves to dry 3-5 minutes.It is convenient and advisable to apply LEATHER EDGES INK in good ventialtion and hand protection conditions to avoid skin contact and any allergic reaction or irritation.
SECURITY:
Look up the security pages.
REMARKS:
Ours zone laboratoires will supply you with any coloured Leather Edges Ink.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of proteins, properly coloured and formuled to dye on the Leather edges. It is easy to clean the surface leather during the aplication.
APPLICATION FIELD:
For leather edges.
INSTRUCTIONS FOR USE:
When leather is cut and piled up in pieces, it will apply Colour Leather Edges Ink with a spraying gun. It leaves to dry 3-5 minutes.
It is convenient and advisable to apply LEATHER EDGES INK in good ventialtion and hand protection conditions to avoid skin contact and any allergic reaction or irritation. Can be applied to sponge or brush.
SECURITY:
Look up the security pages.
REMARKS:
Ours zone laboratoires will supply you with any coloured Leather Edges Ink.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Mixture of natural and synthetic waxes properly formuled and coloured to get a high filling and brightening power when being applied and polished on a lining heel or a leather edge. It has a high power of penetration and covering. Don’t leave with the brush and scratch.
APPLICATION FIELD:
Leather edges and heels.
INSTRUCTIONS FOR USE:
On a leather edge or heel previously sanded with a roughing sandpaper, you will apply our filler MORDIENTE. After a normal drying up you will sand it again with a number 300 to 400 sandpaper. Afterwards you will apply the ink with a paintbrush. Once the ink is dried up you will polish leather with a leather sheets roller at 800 r.p.m. approx. to melt waxes and fill up leather. You will eventually brighten it with a cotton or wool brush impregnated with our BLACK BRIGHTENING WAX.It is convenient and advisable to apply TINTA TCC B-24 in good conditions of ventilation and hand protection to avoid skin contact and any allergic reaction or irritation.
SECURITY:
Look up the security pages.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
CHARACTERISTICS:
Composed of a mixture of waxes and polymers suitably formulated to achieve excellent anchoring on EVA and PU supports.
APPLICATION FIELD:
All kinds of EVA and PU items.
INSTRUCTIONS FOR USE:
Apply with an air spray gun on the substrate to be painted.
Before applying the ink, halogenate the surface with the HALOGENANTE MK with a cloth, replacing it from time to time so as not to generate an excess of silicones that makes it difficult for the ink to anchor, this operation is crucial because the anchoring of the ink on the substrate will depend on a good halogenated. Then apply Tinta Eva-Pu to achieve an excellent anchorage.
SECURITY:
Look up the security pages.
REMARKS:
Our zone laboratories can give Tintas EVA-PU any desired colour.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 28/03/24
