Solid Waxes

CHARACTERISTICS:  A bar of solid wax can have different purposes.  It depends on the kind of wax employed and whether it has abrasive or another kind of additives.  It can be used for different tasks, like brightening, making burnt effects, polishing, etc…

 

                  It is applied on a brush made of any material, and it makes a leather surface aspect change through friction between shoe and brush.  This brush is put together to a mechanical roller with different speeds to get different effects in each case.

                  It is employed in the last finishing touches of gloss and touch when finishing a vamp, but also in soles, heels and sole edges finishing.

CHARACTERISTICS: 

Mixture of different hardness waxes with abrasives from a broad range of abrasive power, properly formuled to get different abrasion degrees when leather polishing.  It is presented shaped as solid green-grey rectangular bars, properly sized to be easily handled.  It is also manufactured in colours, especially black and brown.

APPLICATION FIELD: 

In Corrected leathers called “Antique” or “Bruss off” to get the desired effect as abrasive wax polishes and irregularly tears the leather finish contrast off.  There are very special cases when it is used to reduce too marked pores the Full-grain leather shows, in Box-Calf or Kid-Skin leathers.  You will also use it when soles and heels finishing to get well polished, bright and limpid surfaces.  Generally speaking in any leather polishing.

INSTRUCTIONS FOR USE

The application is by friction of the wax bar to a fabric sheets brush (sewn or not sewn fabric)  put together to a mechanical roller with a speed of 1000 rpm. aprox.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the polishing effect desired.  It is convenient then to brush leather with a clean horsehair brush to make a first cleaning of abrasive remainders.  In the final steps of shoe finishing, it is convenient to remove every Abrasive Wax remainder so that the adherence of final finishing products can properly be made.  For this task we recommend to clean with our Shoe Cleaner.The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.

SECURITY: 

Look up the general security section.

REMARKS:  

We have the whole range of Abrasive waxes with different abrasive power to solve any problem presented in production.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-1CERAABRASIVA-i

CHARACTERISTICS:

Mixture of hard waxes properly formuled to get a Cristaline Gloss effect on shoes already finished with watery glosses or creams.  It is presented shaped as solid white-coloured rectangular bars, properly sized to be easily handled.  It is also manufactured in different colours, especially black or brown.

APPLICATION FIELD: 

In every kind of leather,  Box-Calf,  Kid-skin, Buffalo,  Full-Grain or Corrected leather, to enhance the gloss previously applied.  Also applied on leather and heels to get bright, soft, limpid surfaces.

INSTRUCTIONS FOR USE: 

The application is by friction of the wax bar to a cotton or wool brush put together to a mechanical roller whose speed is 500 to 800 rpm. approx.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the desired polishing effect.The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-3CERAABRILLANTADORA-i

CHARACTERISTICS: 

Mixture of hard waxes properly formuled to get a Cristaline Gloss effect on shoes already finished with watery glosses or creams.  It is presented shaped as solid white-coloured rectangular bars, properly sized to be easily handled.  It is also manufactured in different colours, especially black or brown.

APPLICATION FIELD: 

In every kind of leather,  Box-Calf,  Kid-skin, Buffalo,  Full-Grain or Corrected leather, to enhance the gloss previously applied.  Also applied on leather and heels to get bright, soft, limpid surfaces.

 INSTRUCTIONS FOR USE: 

The application is by friction of the wax bar to a cotton or wool brush put together to a mechanical roller whose speed is 500 to 800 rpm. approx.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the desired polishing effect.The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-4SUPERCERA-i

CHARACTERISTICS: 

Mixture of natural and shyntetic waxes, antisliding and slowing down products properly formulated, to get and energic polishing and spot effect on vegetal tanned or re-tanned leathers properly preapred in the tanning process.  It is presented in coloured tubes, in a properly size ti be easily handled.

APLICATION FIELD: 

In vegetal leathers or semi-vegetal like CRUST,  to get a OLD LEATHER EFFECT, LUCIDO or  SPOTTEDE with the desired color.

In conclusión to get a dark tonality to polish leather, to get an old leather fashioned. Also we get a thin pores as we obtein in the ironing effect.

INSTRUCTIONS FOR USE:

The application is by friction of the wax tube to a Cloth Brus (sewn or not sewn fabric)  put together to a mechanical roller with a speed of 1000 rpm. aprox.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the polishing effect desired.  The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.  

SECURITY:

Look up the general security section.  

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-5CERAMANCHARCRUST-i

CHARACTERISTICS:

Mixture of different hardness waxes with abrasives from a broad range of abrasive power, properly formuled to get different abrasion degrees when leather polishing.  It is presented shaped as solid green-grey rectangular bars, properly sized to be easily handled.  It is also manufactured in colours, especially black and brown.

Aplication Field:

In Corrected leathers called “Antique” or “Bruss off” to get the desired effect as abrasive wax polishes and irregularly tears the leather finish contrast off.  There are very special cases when it is used to reduce too marked pores the Full-grain leather shows, in Box-Calf or Kid-Skin leathers.  You will also use it when soles and heels finishing to get well polished, bright and limpid surfaces.  Generally speaking in any leather polishing.

Instructions for use:

The application is by friction of the wax bar to a fabric sheets brush (sewn or not sewn fabric)  put together to a mechanical roller with a speed of 1000 rpm. aprox.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the polishing effect desired.  It is convenient then to brush leather with a clean horsehair brush to make a first cleaning of abrasive remainders.  In the final steps of shoe finishing, it is convenient to remove every CERA PULIR remainder so that the adherence of final finishing products can properly be made.  For this task we recommend to clean with our Ammoniacal Cleaner. The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.  

Security:

Look up the general security section.  We have the whole range of CERA PULIR with different abrasive power to solve any problem presented in production.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-7CERAPULIR-i

CHARACTERISTICS: 

Mixture of soft waxes properly formuled to get a waxed  thread effect, that way it slides easily at the different cut pieces of the shoe.

APPLICATION FIELD:

In every cases, to make easier the sewing of  shoes.

INSTRUCTIONS FOR USE: 

The application is by friction of the wax on the thread at the moment of the sewing.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-10BARRACERAHILO-i

CHARACTERISTICS: 

Mixture of waxes and antisliding and slowing down products properly formuled, to get an energic polishing on vegetal tanned or re-tanned leathers properly prepared in the tanning process.  It is presented shaped as solid honey-coloured rectangular bars, properly sized to be easily handled.  It is also manufactured in colours, especially black and brown..

APPLICATION FIELD: 

In vegetal leathers “CRUST” kind, to get an “ANTIQUE”, “LUCIDO”, or “SHADOW” effect depending or market denominations.  Generally speaking, it is a darker tonality what you will get when polishing.  You will also get a thinner pore, like the effect got by ironing.

INSTRUCTIONS FOR USE: 

The application is by friction of the wax bar to a fabric sheets brush (sewn or not sewn fabric)  put together to a mechanical roller with a speed of 1000 rpm. aprox.  Once the brush is impregnated, you will approach the leather to be polished trying to get a uniform friction and the polishing effect desired.  The roller machine must have a good dust extractor to avoid any damage for the worker who is polishing shoes.  It is also convenient for the whole polishing operation to use protecting mask and proper glasses.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

6-2CERALUCIDO77-100-108-105-i