Special Products

CHARACTERISTICS:  We classify as special products those shoe finishing products that are neither GLOSSES (Watery or Solvent), nor CREAMS (Self Brightening or To-Be-Polished), but which are also applied as final TOPS to give the definitive fashion look the shoe market is demanding.

                              Every product nowadays in use to finish Full-Grain, Corrected, Nappa-like and Nubuk leathers is included, the same with classical tanning or oil-tanned or waxed, etc.

CHARACTERISTICS:

 Mixture of oils and touch additives, properly formuled, in a aqueous-alcoholic medium.  Its aspect is of an opalescent yellow-white liquid, with an alcohol smell.  It brings vigour and richness to the leather texture and colour, when applied on a Suede-like or Nubuk leather.

APPLICATION FIELD: 

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk texture, when enhancing and leveling tone in a shoe is desired.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), and after repairing damages with our NUBUK REPAIRING STICKS, you will apply colourless or coloured IGUALATEX with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any IGUALATEX coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-1IGUALATEX-i

CHARACTERISTICS: 

Mixture of oils and greasy touch additives properly formuled in a watery medium.  Its aspect is of a milky white liquid with a grease smell.  It brings vigour and darkness to the Suede-like and Nubuk leathers, but it greases them at the same time.  The main differences between MG-2 kinds is their different touch.

APPLICATION FIELD: 

For every leather presented in the shoe market as GREASED, the same with Full-Grain, Corrected or Suede-like Split leathers.

INSTRUCTIONS FOR USE:  

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER) you will apply Grassant MG-2  depending on your decission made in previons tests.  You will apply it  with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.

It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any GRASSANT coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

                                                                                             Data of Revision: 17/01/24

7-2GRASSANTMG2-i

CHARACTERISTICS: 

Mixture of oils and greasy touch additives properly formuled in a solvent medium.  Its aspect is of a transparent yellow-white liquid with a solvents and greases smell.  It brings vigour and darkness to the Suede-like and Nubuk leathers, but it greases them at the some time.  The main difference between GRASA CABALLO SNT and the other greasing products of our range is the touch the leather gets.  It is interesting to test every possibility with our technicians before making a definite decision on which is the right product to use.

APPLICATION FIELD: 

For every leather presented in the shoe market as GREASED, the same with Full-Grain, Corrected or Suede-like Split leathers.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply GRASA CABALLO SNT with a proper sponge, of high resistance, high density and with very small and soft cells, trying to spread product as uniformly as possible.  It is convenient and advisable to apply these greases in good ventilation and hand protection conditions to avoid skin contact, and avoid any allergic reaction.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any GRASA CABALLO SNT coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-5GRASACABALLOSNT-i

CEROXPOL CV LIQ/CEROXPOLCV PASTA

CHARACTERISTICS: 

Emulsion of soft natural and synthetic waxes in a solvent medium, properly formuled to get a leather with a waxy-greasy touch.  Its aspect is of a white liquid with a White Spirit smell.  Gloss is not obtained, for the leather, once the product is applied and dried up, has a matt and dark aspect and a greasy touch.

APPLICATION FIELD: 

Full-grain and Nubuk leather when you want a fashion dark matt aspect.  Also for Pull-up leathers.  As you can imagine, the quantity of product to apply to get the desired greasy touch will depend on leather absorption.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply CEROXPOL CV with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer CEROXPOL CV coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-6CEROXPOLCV-i

CHARACTERISTICS: 

Emulsion of soft natural and synthetic waxes in a solvent medium, mixed with oils and greasy touch additives, properly formuled to get a leather with a greasy touch..  Its aspect is of a white liquid with a White Spirit smell.  Gloss is not obtained, for the leather, once the product is applied and dried up, has a matt and dark aspect and a greasy touch.

APPLICATION FIELD: 

Full-grain and Nubuk leather when you want a fashion dark matt aspect.  Also for Pull-up leathers.  As you can imagine, the quantity of product to apply to get the desired greasy touch will depend on leather absorption.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply CEROXPOL PULL with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer CEROXPOL PULL coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-7CEROXPOLPULL-i

CHARACTERISTICS: 

Mixture of oils, properly formuled, in a aqueous medium.  Its aspect is of an opalescent yellow-white liquid.  It brings vigour and richness to the leather texture and colour, when applied on a Suede-like or Nubuk leather.

APPLICATION FIELD:

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk texture, when enhancing and leveling tone in a shoe is desired.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), and after repairing damages with our NUBUK REPAIRING STICKS, you will apply colourless or coloured ECO-IGUALATEX with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance. It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS:

Our zone laboratories can offer any ECO-IGUALATEX coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-9ECO-IGUALATEX-i

CHARACTERISTICS: 

Mixture of oils and greasy touch additives properly formuled in a aqueous medium.  Its aspect is of a transparent yellow-white liquid with a greases smell.  It brings vigour and darkness to the Suede-like and Nubuk leathers, but it greases them at the some time.  The main difference between COW-BOY HORSE GREASE and the other greasing products of our range is the touch the leather gets.  It is interesting to test every possibility with our technicians before making a definite decission on which is the right product to use.

APPLICATION FIELD: 

For every leather presented in the shoe market as GREASED, the same with Full-Grain, Corrected or Suede-like Split leathers.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply COW-BOY HORSE GREASE with a proper sponge, of high resistance, high density and with very small and soft cells, trying to spread product as uniformly as possible.  It is convenient and advisable to apply these greases in good ventilation and hand protection conditions to avoid skin contact, and avoid any allergic reaction.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any HORSE GREASE coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-13GRASACABALLOCAMPERA-i

CHARACTERISTICS:

Aquous emulsion of soft waxes, properly formulated to get soft –waxy and natural touch.  Its aspect is a light Brown liquid, slightly opaque.

APPLICATION FIELD: 

Full grain leather, and Nubucks wants to get a grasy matt aspect. Also it recomended to add like an aditive LUSTRAFIX, to get a warm touch.

INSTRUCCTIONS FOR USE:

You will apply with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.

SECURITY: 

Look up the general security section.  

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-16CERANAPA-i

7.8.A. NUBUK PROTECTOR CON FLUOROCARBONOS

 H-225, H-245

CHARACTERISTICS:

Mixture of water-repellent and touch agents, with fluorocarbons, conveniently formulated in a solvent medium Its aspect is of a transparent liquid with an alcohol smell. It brings vigour and richness to leather texture, colour and superficial resistance to water, when acting on a Suede-like or Nubuk leather.  The main differences between H-225 y H-245, is darkness and touch different degrees.  That’s why it is interesting to test every possibility with our technicians before making a definitive decission.

APPLICATION FIELD: 

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk texture, when enhancing and leveling tone in a shoe is desired.  The other effect is protecting the shoe surface from dirts and from water while being used.

INSTRUCTIONS FOR USE:

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply Nubuk Protector with a spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any Nubuk Protector from our range.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-8-ANUBUKPROTECTORCONFLUOROCARBONOS

 

 

                                                               Review date: 12/04/24

CHARACTERISTICS: 

Emulsion of soft natural and synthetic waxes in a watery medium, properly formuled to get a leather with a waxy-greasy touch.  Its aspect is of a white liquid..  Gloss is not obtained, for the leather, once the product is applied and dried up, has a matt and dark aspect and a greasy touch.

APPLICATION FIELD: 

Full-grain and Nubuk leather when you want a fashion dark matt aspect.  Also for Pull-up leathers.  As you can imagine, the quantity of product to apply to get the desired greasy touch will depend on leather absorption.

INTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply ECO-CEROXPOL 280 with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer ECO-CEROXPOL 280 coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-20ECOCEROXPOL280-i

CHARACTERISTICS: 

Mixture of oils and touch additives, properly formuled, in a aqueous-alcoholic medium.  Its aspect is of a transparent yellow-white liquid, with an alcohol smell.  It brings vigour and richness to the leather texture and colour, when applied on a Suede-like or Nubuk leather.

APPLICATION FIELD: 

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk texture, when enhancing and leveling tone in a shoe is desired.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), and after repairing damages with our NUBUK REPAIRING STICKS, you will apply colourless or coloured AVIVADOR 275 with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY:

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any AVIVADOR 275 coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-22AVIVADOR275-i

CHARACTERISTICS: 

Mixture of acrylic polymers and touch aditives, properly formuled to get colour fix in Suede-like or Nubuk.

APPLICATION FIELD: 

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply Nubuk Colour Fixer Ex -50 with a spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-23FIJADORCOLORNUBUKCOLOREX50-i

CHARACTERISTICS:

Mixture of polymers in liquid state, properly formulated to provide a harder touch to leather. It has the look of a white liquid.

APPLICATION FIELD: 

Any type of leather, when it is wanted a harder touch. Its efficiency grows when leather has suffered stretching due to the mechanical action during shoe making.

INSTRUCTIONS FOR USE: 

Apply with a paintbrush over the meat side of the leather, once leather cuts have been coined. Then, leather cuts have to be left to dry up, and go on with rest of shoe making process.

When leather gets higher temperature in the moulding and oven processes, the polymer reaction is produced, providing leather with a certain hardness and resistentce to elongation.

SECURITY:

 Look up the security sheets.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-3ENDURECEDOR3CZ-i

CHARACTERISTICS: 

Mixture of oils, waxes and touch additives properly formuled in a watery medium.  Its aspect is of a milky white liquid.  It brings vigour and darkness to the Suede-like and Nubuk leathers, but it greases them at the same time. 

APPLICATION FIELD: 

For every leather presented in the shoe market as GREASED, the same with Full-Grain, Corrected or Suede-like Split leathers.

INSTRUCTIONS FOR USE:  

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER) you will apply Eco-Grassant F-29 INC, depending on your decission made in previons tests.  You will apply it  with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any ECO-GRASSANT F29 coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-25ECO-GRASSANTF29-i

CHARACTERISTICS: 

Mixture of waxes and acrilic polymers properly formulated to get a high gloss, with a very silky and nice touch.  Its aspect is of a milky white liquid.

APPLICATION FIELD: 

For the full grain when you want to get an aged effect, to contrast the colour of the leather with the white colour of the product.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply BASE TALKINA A coloured to the tone desired with a spraying gun with a nozzle opening of 1-1,5 mm. at 3-5 atm. of pressure, and a proper distance to the shoe.  The experience tells us the correct distance is from 25 to 35 cm.  This product, besides to give to the leather a silky touch and a high gloss, gets two-colours very typical with the brush.  It is important to have a good application cabin, equipped with an extractor fan, water screen and good light.  It is convenient to use a protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories will supply you with any coloured BASE TALKINA A.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-4BASETALKINA_A_INC-i

CHARACTERISTICS:

 It’s a mixture of oils and esters,  properly formuled to get on the leather a very high resistence on drop water.  Its aspect is a fluid oil  with yellow color and insoluble in water medium.

APPLICATION FIELD:

 In leathers where you want to get and improve the resistence of drop water without loosing natural, permanent and grasy touch.

It gets on leather a good filling and dosen’t provoque eflorecente greases.  It can be use in vegetal leathers, softys, nubuks and suedes.

 

INSTRUCTIONS FOR USE:

Apply with a proper sponge and leave dry some minutes.

SECURITY:

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-17ACEITEPROTECTORP-i

CHARACTERISTICS: 

Solution of nitrocellulose coloured properly formulated in a solvent medium.  Its aspect is of a liquid colured and a special flavour of solvents.

APPLICATION FIELD:  

Full-grain and Corrected leather (in special in tannery finishings with lacqers and resins) where it wants to get fashion effects in seams, heels, toes…

INSTRUCCIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply DIFUMINO with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.

SECURITY: 

Look up the general security section

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-24DIFUMINO-i

CHARACTERISTICS: 

Emulsion of soft natural and synthetic waxes in a solvent medium, properly formuled to get a leather with a waxy-greasy touch.  Its aspect is of a white liquid with a White Spirit smell.  Gloss is not obtained, for the leather, once the product is applied and dried up, has a matt and dark aspect and a greasy touch.

APPLICATION FIELD: 

Full-grain and Nubuk leather when you want a fashion dark matt aspect.  Also for Pull-up leathers.  As you can imagine, the quantity of product to apply to get the desired greasy touch will depend on leather absorption.

INSTRUCTIONS FOR USE: 

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply CEROXPOL 15-LIQUID with an spraying gun with a nozzle opening of 1 to 1,5 mm. and a pressure of 4 to 6 atm., from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer CEROXPOL 15-LIQUID. coloured with the desired tone.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-26CEROXPOL15LIQ-i

 

 

CHARACTERISTICS:

Mixture of surfactants and oils properly formuled in a aqueous-alcoholic medium.  Its aspect is of yellow dun liquid with an alcohol and pine oil smell.  When leather is wet and penetrated with this product, it gets softer and can be handled more easily in operations such as preparing or lasting of mocassins vamps, avoiding leather breaking.

APPLICATION FIELD:

In every shoe manufacturing operation when leather hardness makes it difficult to be handled.

INSTRUCTIONS FOR USE: 

C Softener must be diluted with water in a 1 to 9 or 2 to 8 proportion.  That’s to say, two parts of Softener with 8 parts of water.  In extreme difficulty cases you will look up our Technical Department.  You will wet the leather to be handled (sewn, lasted or stretched….) with the C Softener dilution.  Then you will wait for 5 minutes for the effect of softening to appear and will begin to handle leather.

It is convenient to apply product in a well ventilated zone and protect your hands with proper work glasses.

SECURITY:

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-33ABLANDADORC-i

CHARACTERISTICS: 

Mixture of surfactants and oils properly formuled in a aqueous-alcoholic medium.  Its aspect is of yellow nearly transparent liquid with an alcohol smell.  When leather is wet and penetrated with this product, it gets softer and can be handled more easily in operations such as preparing or lasting of mocassins vamps, avoiding leather breaking.

APPLICATION FIELD: 

In every shoe manufacturing operation when leather hardness makes it difficult to be handled.

INSTRUCTIONS FOR USE: 

A Softener must be used pure or diluted with water in a 1 to 1 proportion.  That’s to say, one part of Softener with 1 part of water.  In extreme difficulty cases you will look up our Technical Department.  You will wet the leather to be handled (sewn, lasted or stretched….) with the C Softener dilution.  Then you will wait for 5 minutes for the effect of softening to appear and will begin to handle leather.It is convenient to apply product in a well ventilated zone and protect your hands with proper work glasses.

SECURITY: 

Look up the general security section.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-34ABLANDADORA-i

7.8.B NUBUK PROTECTOR SIN FLUOROCARBONOS

                         NP 6/2 ,H-330/1,H-345,H-350,H-355

CHARACTERISTICS: 

Mixture of water-repellent and touch agents, fluorocarbon-free, properly formuled in a solvent medium.  Its aspect is of a transparent liquid with an alcohol smell. It brings vigour and richness to leather texture, colour and superficial resistance to water, when acting on a Suede-like or Nubuk leather.  The main differences between NP-6/2, H-330/1, H-345, H-350 y H-355, is darkness and touch different degrees.  That’s why it is interesting to test every possibility with our technicians before making a definitive decission.

APPLICATION FIELD: 

As its characteristics tell, you will apply it on leathers with a Suede-like or Nubuk texture, when enhancing and leveling tone in a shoe is desired.  The other effect is protecting the shoe surface from dirts and from water while being used.

INSTRUCTIONS FOR USE:

After thoroughly cleaning leather from glues and other dirts (with our NUBUK CLEANER RUBBER), you will apply Nubuk Protector with a spraying gun with a nozzle opening of 1 to 1,5 mm. and a 4 to 6 atm. pressure, from a proper distance.  Experience tells us that 25 to 35 cm. is the correct distance.  It is important to have an application cabin equipped with a good extractor fan, water screen and good light for the application to be correct.  It is convenient to use protecting mask.

SECURITY: 

Look up the general security section.

REMARKS: 

Our zone laboratories can offer any Nubuk Protector from our range.

Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.

7-8-BNUBUKPROTECTORSINFLUOROCARBONOS-i