Glosses
CHARACTERISTICS: The purpose of a Gloss is to give final look to the already manufactured and ready to pack and send shoe. It is maybe the most important step in the shoe finishing process. The stroke of atraction a shoe will have in its window to be sold will depend on this part of the process. An excessive gloss or a low gloss, or with unnatural plastic look can make this article fail to be sold. Anyway the concept of gloss is a little old-fashioned; some years ago a lower or higher gloss was applied to the shoe depending on the kind of the leather employed, making differences between Box-Calf, Full-grain, Corrected or Nappa. There are nowadays new fashion leathers, greased and waxed ones, and new kind of glosses must be used in these cases, made of grease or wax. These other glosses are named like TOPS, and will be described in the Special Products (TOPS) for FASHION FINISHES. Here we will deal with the classical glosess, divided into two main groups:
4.1 GLOSSES IN SOLVENT BASE
4.2 GLOSSES IN WATERY BASE
Both kinds of Glosses have different characteristics, but the most outstanding ones are the difference in the drying time (Solvent gloss is faster than Watery gloss) and touch (Watery gloss has a more natural, hot touch). It is convenient anyway, for every manufacturer with a new shoe model and a new leather to make tests with our technicians help to define the kind of gloss to be used in production process.
A point to be considered of when choosing the kind of gloss is the pollution degree generated during application. Here the solvent products are the most offensives.
GLOSSES IN SOLVENT BASE
CHARACTERISTICS:
Dissolution of nitrocelulose properly formuled in a solvent medium with silicone and wax additives to give a soft and warm touch to leather. Its aspect is of a transparent liquid, lightly yellow, and with the characteristic solvent smell. The gloss obtained is of high power and with a quite nice touch.
APPLICATION FIELD:
Full-grain and Corrected leather, specially with a resin and lacquer tanning finish.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Esther of cellulose butirated free of groups nitro, properly formuled in a solvent medium with silicone oils and waxes additives to give a soft and warm touch to leather. Its aspect is of a transparent and bright liquid with the characteristic solvent smell. The gloss obtained in a correct application is of average-high power and quite nice touch.
APPLICATION FIELD:
White Full-grain and Corrected leather. It is a great product for white leather as light does not make it yellow like the rest of lacquer glosses.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol S-BL N with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is advisable to clean with Ammoniacal Cleaner and apply a base to leather before gloss application to improve its adherence and aging. In our zone laboratories gloss strength can be modified to get what it is desired in each case.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Emulsion of nitrocelulose properly formuled in a solvent medium with silicone oils and wax additives to give a soft and warm touch to leather. Its aspect is of a milky yellow liquid with the characteristic solvent smell. The gloss obtained in a correct application is of average-high power and a very soft touch, reminding of dressmaking Nappa.
APPLICATION FIELD:
Full-grain and Corrected leather especially those Nappa-like leathers with a dressmaking Nappa touch.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol S-500 with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is advisable to clean with Ammoniacal Cleaner and apply a base to leather before gloss application to improve its adherence and ageing. When you have a shoe with a combination of Nubuk and Full-grain leather, you can apply Luxsol S-500 to both kinds of leather with satisfactory results. It is advisable, anyway, to ask our technicians about it.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Dissolution of nitrocelulose properly formuled in a solvent medium with silicone and wax additives to give a soft and warm touch to leather. Its aspect is a turbid liquid for the matts and with the characterisitc solvent smell. With his application obtains an unpolished aspect.
APPLICATION FIELD:
Full-grain and Corrected Box-Calf leather, in special the leather finishes in tanneries with resins and lacquers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol S-Lausane with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
OBSERVATIONS:
In our zone laboratories can modify the intensity of the Gloss and also coloured withe the desired tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Dissolution of nitrocelulose properly formuled in a solvent medium with silicone and wax additives to give a soft and warm touch to leather. Its aspect is of a transparent liquid, lightly yellow, and with the characteristic solvent smell. The gloss obtained is of average-high power and with a quite nice touch.
APPLICATION FIELD:
Full-grain and Corrected Box-Calf leather, in special the leather finishes in tanneries with resins and lacquers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Brillo Florida with a spraying gun with a nozzle opening of 1,5 mm., with a 2-4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
From a glossy solvent base we are able to solve any repairing problem which might appear in the TRANSFER or METALLIC finishes.
INSTRUCTIONS FOR USE:
After thoroughly cleaning glues and other kinds of dirt, and after colour repairing and levelling if necessary, apply “SOLVENT COLOURS BASE” on LUXSOL or SOLVENT REPAIR and apply with the spray gun with an opening of 1-1,5 mm. at a pressure of 2-4 atm. and the right distance to the shoe. Practice tells us that 25-35 cm. is a proper distance.It is important to have a good application cabin, equipped with a proper extractor, curtain of water and the adequate light for the right application. It is convenient to wear a protecting mask.
SECURITY:
Check the safety data sheet.
OBSERVATIONS:
In our zone laboratories every colour and brightness , is prepared, so you will have fast solutions to production problems.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Dissolution of nitrocelulose properly formuled in a solvent medium with silicone and wax additives to give a soft and warm touch to leather. Its aspect is of a transparent liquid, lightly yellow, and with the characteristic solvent smell. The gloss obtained is of very high power and with a quite nice touch.
APPLICATION FIELD:
Full-grain and Corrected Box-Calf leather, in special the leather finishes in tanneries with resins and lacquers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol S-1 with a spraying gun with a nozzle opening of 1,5 mm., with a 2-4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Dissolution of nitrocelulose properly formuled in a solvent medium with silicone and wax additives to give a soft and warm touch to leather. The gloss obtained is of high power and with a quite nice touch.
APPLICATION FIELD:
Full-grain and Corrected leather, specially with a resin and lacquer tanning finish.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling if necessary, you will apply Luxsol with a spraying gun with a nozzle opening of 1,5 mm., with a 4 atm. pressure and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm. It is important to have a good application cabin equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
GLOSSES IN WATERY BASE
CHARACTERISTICS:
Mixture of natural and synthetic waxes, emulsioned and properly formuled to get a high power gloss, very transparent and limpid, with a natural touch. Its aspect is of a milky yellow liquid, with a characteristic smell of waxes.
APPLICATION FIELD:
It is applied on aniline average and high quality leathers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Lustrapell with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base before gloss application to unify absorption and improve ageing. Our zone laboratories will give Lustrapell any aniline colour if needed, to emphasize a tone or level shoe general colour.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of natural and synthetic waxes, emulsioned and properly formuled to get a medium power gloss, with a natural and nice touch, reminding of dressmaking Nappa.
APPLICATION FIELD:
It is applied on aniline average and high quality leathers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Lustrafix N-1430 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m. It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base before gloss application to unify absorption and improve ageing. Our zone laboratories will give Lustrafix N-1430 any aniline colour if needed, to emphasize a tone or level shoe general colour.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of waxes emulsioned and properly formuled to get a medium power gloss, with a natural and nice touch, reminding of dressmaking Nappa.
APPLICATION FIELD:
It is applied on aniline average and high / medium quality leathers.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Eco-Lustrafix N-1430 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
Our zone laboratories can give ECO-LUSTRAFIX any environment-friendly aniline colour if needed, to enhance or level the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of acrylic polymers, waxes and leveling and touch additives properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Full-grain good-quality leathers, when you want to enhance the leather quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Lustrafix A-10 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m. It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of polymers, waxes and leveling and touch additives properly formuled to get a medium gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Aniline leathers of high-medium quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Eco-Lustrafix M-20 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.Our zone laboratories can give any aniline colour if needed, to enhance or equalize the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of polymers, waxes and leveling and touch additives properly formuled to get a medium gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Full-grain good-quality and Corrected leathers in all colours even white, when you want to enhance the leather quality.
INTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply ECO-LUSTRAFIX A-105/3 NATURAL with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of acrylic polymers, waxes and leveling and touch additives properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Full-grain good-quality leathers, when you want to enhance the leather quality and good resistence to wet scrub and water drop is required.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Eco-Lustrafix A-21 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m. It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Data of Revisión:17/01/24
CHARACTERISTICS:
Mixture of acrylic polymers, waxes and urethanes, properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a grey liquid with a nice smell.
APPLICATION FIELD:
It is a great product for full-grain leather, where you want to enhance the leather quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply ECO-LUSTRAFIX UNIVERSAL COLOURLESS. with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m. It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
Our zone laboratories can give ECO-LUSTRAFIX UNIVERSAL COLOURLESS any environment-friendly aniline colour if needed, to enhance or level the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of polymers, waxes and leveling and touch additives properly formuled to get a medium-high gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Aniline leathers of high-medium quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Eco-Lustrafix M-25 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.Our zone laboratories can give any aniline colour if needed, to enhance or equalize the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of polymers, waxes and leveling and touch additives properly formuled to get a medium gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Aniline leathers of high-medium quality. Also for nappa-like leathers in which you want to achieve a natural look and a soft touch
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply Eco-Lustrafix 52/3 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.Our zone laboratories can give any aniline colour if needed, to enhance or equalize the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of acrylic polymers, waxes and leveling and touch additives properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Full-grain good-quality leathers, when you want to enhance the leather quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply ECO-LUSTRAFIX A-210 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of acrylic polymers, waxes and leveling and touch additives properly formuled to get a high power gloss, with a very natural and nice touch. Its aspect is of a milky yellow liquid with a nice smell.
APPLICATION FIELD:
Full-grain good-quality leathers, when you want to enhance the leather quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply ECO-LUSTRAFIX A-16 with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.. These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m. It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is convenient to apply a base to leather before gloss application to improve its adherence and ageing.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
CHARACTERISTICS:
Mixture of natural and synthetic waxes with the incorporation of a polymer that have been conveniently formulated to obtain a High Gloss, with a pleasant and slippery touch. It looks like a milky, yellowish liquid with a pleasant smell.
APPLICATION FIELD:
It is applied on aniline leathers of good and medium quality.
INSTRUCTIONS FOR USE:
After thoroughly cleaning leather from glues and other dirts, and after repairing and leveling colours if necessary, you will apply ECO-UNIVERSAL M-40. with a spraying gun with a nozzle opening of 1-1,5 mm. at 4-6 atm. of pressure, and a proper distance to the shoe. The experience tells us the correct distance is from 25 to 35 cm.
These glosses have a good advantage: they improve their effects with a good brushing, using a cotton or wool brush impregnated with our BRIGHTENING WAX at 500 to 800 r.p.m.
It is important to have a good application cabin, equipped with an extractor fan, water screen and good light. It is convenient to use a protecting mask.
SECURITY:
Look up the general security section.
REMARKS:
It is advisable that before the application ECO-UNIVERSAL M-40, a Base is applied to the leather to unify the absorption and improve aging.
Our zone laboratories can give ECO-UNIVERSAL M-40 any environment-friendly aniline colour if needed, to enhance or level the shoe general tone.
Barrachinas cannot control the conditions under which its products are used, therefore do not accept responsibilities concerning the results and/or consequences from its usage.
Review Date: 30/04/24